2024

F. Wetzler, J.-E. Nebel, W. Zhang, S. Urschel, P. Starke, M. Saumer, "Electrochemical Deposition of Cobalt Phosphorus for Hard Magnetic Micro Devices and the Impact on Magnetic Anisotropy," Journal of Materials Research and Technology, 2024, ISSN 2238-7854, doi: 10.1016/j.jmrt.2024.09.144

2023

W. Zhang, L. Decker, T. Brigadski, B. Gundelsweiler and S. Urschel, "A Linear Magnetic Soft Actuator with Image-based Force Sensing for Mechanical Characterization of Soft Materials," 2023 IEEE International Conference on Robotics and Biomimetics (ROBIO), Koh Samui, Thailand, 2023, pp. 1-6, doi: 10.1109/ROBIO58561.2023.10355041

A. Bauer, B. H. Zacher, S. Urschel, “Multilayered PCB-Based Axial Flux Motor Windings with Thermal VIAs to Enhance Thermal Utilization,” in IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society, Nov. 2023, doi: 10.1109/IECON51785.2023.10311898

S. Bold, S. Urschel, “A Knowledge Discovery Process Extended to Experimental Data for the Identification of Motor Misalignment Patterns,” Machines, vol. 11, no. 8, p. 827, Aug. 2023, doi: 10.3390/machines11080827

A. Navarro-Navarro, J. E. Ruiz-Sarrio, V. Biot-Monterde, J. A. Antonino-Daviu, V. Becker, and S. Urschel, “Application of Transient Analysis Techniques to Fault Diagnosis in Low- and Medium-Power Synchronous Machines,” Machines, vol. 11, no. 2, p. 288, Feb. 2023, doi: 10.3390/machines11020288

2022

A. Bauer, B. H. Zacher, C. Schumann and S. Urschel, "Challenges and Design Aspects of Power Electronically Fed PCB Motor Windings," IKMT 2022; 13. GMM/ETG-Symposium, Linz, Austria, 2022, pp. 1-6. (externer Link)

W. Zhang, L. Decker, A. Christmann, J. Panzer, S. Urschel and B. Gundelsweiler, "Design of a linear magneto-mechanical bio-actuator for cell-alignment in tissue engineering," IKMT 2022; 13. GMM/ETG-Symposium, Linz, Austria, 2022, pp. 1-8. (externer Link)

A. Bauer, C. Schumann and S. Urschel, "Analytical Calculation of Eddy Current related Losses and Parasitic Torque in PCB Windings," 2022 International Conference on Electrical Machines (ICEM), 2022, pp. 1750-1756, doi: 10.1109/ICEM51905.2022.9910682.

S. Bold and S. Urschel, "Feature Identification for Diagnosing Misalignment under the Influence of Parameter Variation," 2022 International Conference on Electrical Machines (ICEM), 2022, pp. 684-689, doi: 10.1109/ICEM51905.2022.9910920.

V. Becker, M. Schneider, J. A. Antonino-Daviu and S. Urschel, "Cloggage Detection of a Wastewater Pump based on Motor Current Analysis," 2022 International Conference on Electrical Machines (ICEM), 2022, pp. 690-695, doi: 10.1109/ICEM51905.2022.9910776.

2021

V. Becker, T. Schwamm, S. Urschel and J. Antonino-Daviu, "Fault Detection of Circulation Pumps on the Basis of Motor Current Evaluation," in IEEE Transactions on Industry Applications, vol. 57, no. 5, pp. 4617-4624, Sept.-Oct. 2021, doi: 10.1109/TIA.2021.3085697.

V. Becker, M. Eckl, B. Mueller, S. Urschel and J. Antonino-Daviu, "Online Condition Monitoring of Pumps based on Adapted Reference Frame Theory," 2021 IEEE 13th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), 2021, pp. 153-159, doi: 10.1109/SDEMPED51010.2021.9605492.

V. Becker, T. Schwamm, S. Urschel, and J. A. Antonino-Daviu, “Two Current-Based Methods for the Detection of Bearing and Impeller Faults in Variable Speed Pumps,” Energies, vol. 14, no. 15, p. 4514, Jul. 2021, doi: 10.3390/en14154514.

S. Bold, V. Becker, S. Urschel, and J. Schaab, “Comparison of Fixed and Variable Speed Pumps Under Consideration of Manufacturer and Operator Aspects,” Springer International Publishing, pp. 649–664, 2021, doi: 10.1007/978-3-030-69799-0_46.

2020

S. Bold and S. Urschel, "Assessment of approaches for technical diagnostic of pump faults with induction motor as transducer," 2020 23rd International Conference on Electrical Machines and Systems (ICEMS), 2020, pp. 810-815, doi: 10.23919/ICEMS50442.2020.9291035.

V. Becker, T. Schwamm, S. Urschel, and J. A. Antonino-Daviu, “Fault Investigation of Circulation Pumps to Detect Impeller Clogging,” Applied Sciences, vol. 10, no. 21, p. 7550, Oct. 2020, doi: 10.3390/app10217550

V. Becker, T. Schwamm, S. Urschel, and J. A. Antonino-Daviu, "Detection of Rotor and Impeller Faults in Wet-rotor Pumps," 2020 International Conference on Electrical Machines (ICEM), 2020, pp. 1308-1314, doi: 10.1109/ICEM49940.2020.9270767.

S. Urschel, "Der 3. Weg. Den Wirkungsgrad von Kreiselpumpen mit Software statt mit Laufradanpassung steigern," delta-p-online, Fachbeitrag, 2020. (externer Link) 

2019

M. Eckl, F.-H. Wurm, Liu S., S. Urschel, J. Schullerer, J. Schaab, and K. Kowalski, "New control mode to decrease energy consumption of circulator pumps", International Rotating Equipment Conference (IREC), 2019

J. Dolgirev, M. Kalter, S. Urschel, R. Funck, J. Jung, and V. Schimmelpfennig, "Resource-Saving Circulating Pump on basis of an Integrated Synchronous-Reluctance Drive System," 2019 IEEE 4th International Future Energy Electronics Conference (IFEEC), 2019, pp. 1-7, doi: 10.1109/IFEEC47410.2019.9014958.

V. Becker, S. Bold, J. Schaab, and S. Urschel, "Comparison of fixed and variable speed pumps under consideration of manufacturer and operator aspects", Energy Efficiency in Motor Systems, Proceedings of the 11th international Conference EEMODS’19, Springer, 2021, pp. 649-664, doi: 10.1007/978-3-030-69799-0

J. Dolgirev, M. Kalter, S. Urschel, R. Funck, J. Jung, and V. Schimmelpfennig, "Resource-saving circulation pump through optimization of the integrated canned motor," IKMT 2019 - Innovative small Drives and Micro-Motor Systems; 12. ETG/GMM-Symposium, 2019, pp. 1-6. (externer Link)

2018

S. Bold, J. Dolgirev, and S. Urschel, "Resource and Energy Efficient Synchronous Reluctance Machine for Small Power Applications," 2018 21st International Conference on Electrical Machines and Systems (ICEMS), 2018, pp. 582-587, doi: 10.23919/ICEMS.2018.8549270.

2017

S. Urschel and J. Dolgirev, "Energy- and resource saving synchronous reluctance machine for the use in circulation pumps," 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 - ECCE Asia), 2017, pp. 2139-2144, doi: 10.1109/IFEEC.2017.7992382.

2016

S. Urschel, J. Dolgirev, J. Schullerer and P. Hauck, "Resource efficient synchronous motor in flux barrier design with enlarged air gap," 2016 19th International Conference on Electrical Machines and Systems (ICEMS), 2016, pp. 1-5. (externer Link)

2013

S. Urschel, "Energieeffiziente Pumpenantriebe in Synchrontechnik", Berichtsband Fachveranstaltung Energieeffiziente Pumpenantriebstechnik, 2013

2010

Y. Burkhardt, G. Huth and S. Urschel, "Eddy current losses in PM canned motors," The XIX International Conference on Electrical Machines - ICEM 2010, 2010, pp. 1-7, doi: 10.1109/ICELMACH.2010.5607812.

2009

G. Huth and S. Urschel, "Energieeffiziente Pumpenantriebstechnik", Bulletin SEV/AES, Nr. 2, S. 23-27, Februar, 2009, doi: 10.5169/SEALS-856355.

2007

S. Urschel, "Energieeffiziente Pumpenantriebe", In: Proceedings Internationaler ETG-Kongress, 2007. (externer Link)

S. Urschel and G. Huth, "Rastmomente bei AC-Servomotoren in Zahnspulentechnik", GMM-Fachbericht, Vol. 54, S. 21-27, 2007. (externer Link)

2006

S. Urschel and G. Huth, "Betriebsverhalten von permanenterregten Spaltrohr-Pumpenmotoren," Proceedings Elektrisch mechanische Antriebssysteme, S. 577-591, 2006. (externer Link)

G. Huth and S. Urschel, "Geregelte Antriebe bieten großes Einsparpotential," Antriebstechnik, Nr. 6, S. 56-61, Juni, 2006. (externer Link)

Zur Erstellung der Liste wurde der IEEE-Stil angewendet