For the first experiments in distilled water, a miniaturized electrochemical in-situ cell with a standard three-electrode system, which is also used in potentiodynamic polarization measurements, is being developed. The challenge here is that the cell must be sealed at the sample shafts so that cyclic loading of the specimen can occur in the cell
Following this characterization, the damaged volume is removed from the specimen, which is polished and then subjected to secondary loading on various test systems at test frequencies of 5, 60, 200 and 1000 Hz. In the HCF range, a direct comparison with the original undamaged specimens can thus be derived. In the VHCF range, possible deviations i
back
Two factors in particular must be considered here. Relevant damage mechanisms can change from the HCF to the VHCF regime. For example, the crack initiation points shift into the volume in the field of defects, such as inclusions and precipitates, especially in the case of high-strength conditions. In the case of ductile materials, damage
Characterisation of materials and structures by means of scanning electron microscopy and EDX, EBSD and STEM analysis
Within the scope of the research project funded by the DFG, a high-resolution scanning electron microscope with EDX, EBSD and STEM detectors as well as an external FIB will be procured and scientific staff will be provided to opera
back
Micro- and nanostructured hard magnetic materials and components for microtechnical applications "MiNaMag"
Permanent magnets are used in a variety of ways and increasingly in technical products, above all for data storage, in energy technology, in sensor technology, and for transport and separation processes. This large market is mo
Retired Professor
Prof. Dr.-Ing Joachim E. Hoffmann
Department Management WWHK
Professor and Head of Department
Prof. Priv.-Doz. Dr.-Ing. habil. Peter Starke curriculum vitae ResearchGate SciPort RLP informationbox
Chief Engineer, Group Leader "Fatigue and fatigue life calculation"
M.Sc. Fabian Weber Researchgate inform
Scientific Assistant
2022 - today Scientific Assistant, University of Applied Sciences Kaiserslautern
2021 - 2022 Assistant, University of Applied Sciences
2019 - 2021 Master's Degree, Study of Mechanical Engineering, University of Applied Sciences
2017 - 2018 T
back
Cheef Engineer
Group leader "Fatigue and service life calculation"
Scientific Assistant
2023 - today Head Engineer Materials Science Laboratory, Group leader "Fatigue and service life calculation", University of Applied Sciences Kaiserslautern
2021 - today Scientific Assistant, Universi
Student Research Assistant (Materials Science Lab in Cooperation with AG Rauch, Department of Building and Design)
Forecast models for the remaining Lifetime an continued Operation of wind Turbines (FutureWind)
2022 – today Master's Degree, Mechanical engineering, University of Applied Sciences Kaiserslautern
Student Research Assistant
Member of Student Council (AING)
Member of Department Council (AING)
2021 – today Student Research Assistant Materials Science Laboratory, University of Applied Sciences Kaiserslautern
2017 – today Study of Mechanical Engineering, Simulation, University of Appli
