Suchergebnisse - University of Applied Science Kaiserslautern

611.

Evaluation of fracture surfaces with regard to damage development of cyclically loaded specimens made of C22E and 20MnCrS5

Date: 22.09.2023

For the first experiments in distilled water, a miniaturized electrochemical in-situ cell with a standard three-electrode system, which is also used in potentiodynamic polarization measurements, is being developed. The challenge here is that the cell must be sealed at the sample shafts so that cyclic loading of the specimen can occur in the cell

612.

Evaluation of fracture surfaces with regard to damage development of cyclically loaded specimens made of C22E and 20MnCrS5 - Evaluation of fracture surfaces with regard to damage development of cyclically loaded specimens made of C22E and 20MnCrS5

Date: 15.07.2021

Evaluation of fracture surfaces with regard to damage development of cyclically loaded specimens made of C22E and 20MnCrS5 Within the framework of the planned research project, the aim is to identify the specifics of the fracture surfaces and to record the individual areas quantitatively in order to enable conclusions to be drawn about the materia

613.

Evaluation of fracture surfaces with regard to damage development of cyclically loaded specimens made of C22E and 20MnCrS5 - Use of the electrochemical potential to characterize the surface damage behavior of cyclically loaded materials

Date: 14.09.2023

Use of the electrochemical potential to characterize the surface damage behavior of cyclically loaded materials As part of the research project, a corrosion measuring set-up is to be set up and integrated into a fatigue testing system (rotating bending machine and/or vibration testing system) so that electrochemical investigations can be carried o

614.

Evaluation of the frequency influence on the fatigue behaviour of unalloyed steels

Date: 02.11.2022

back

615.

Evaluation of the frequency influence on the fatigue behaviour of unalloyed steels

Date: 14.09.2023

Two factors in particular must be considered here. Relevant damage mechanisms can change from the HCF to the VHCF regime. For example, the crack initiation points shift into the volume in the field of defects, such as inclusions and precipitates, especially in the case of high-strength conditions. In the case of ductile materials, damage developm

616.

Evaluation of the frequency influence on the fatigue behaviour of unalloyed steels

Date: 31.01.2023

617.

Evaluation of the frequency influence on the fatigue behaviour of unalloyed steels

Date: 22.09.2023

back Two factors in particular must be considered here. Relevant damage mechanisms can change from the HCF to the VHCF regime. For example, the crack initiation points shift into the volume in the field of defects, such as inclusions and precipitates, especially in the case of high-strength conditions. In the case of ductile materials, damag

618.

Evaluation of the frequency influence on the fatigue behaviour of unalloyed steels

Date: 31.01.2023

Evaluation of the frequency influence on the fatigue behaviour of unalloyed steels The fatigue life evaluation methods (LPV) developed at WWHK in recent years have so far been limited purely to the transition between LCF (Low Cycle Fatigue) and HCF (High Cycle Fatigue) and to the HCF field. This has recently led to controversial discussions regar

619.

Evaluation of the frequency influence on the fatigue behaviour of unalloyed steels - Evaluation of the frequency influence on the fatigue behaviour of unalloyed steels

Date: 14.09.2023

Evaluation of the frequency influence on the fatigue behaviour of unalloyed steels Fatigue life prediction methods (LPV) developed at WWHK in recent years have so far been limited to the transition between LCF (Low Cycle Fatigue) and HCF (High Cycle Fatigue) and to the HCF regime. This has recently led to controversial discussions regarding the ut

620.

Evaluation of the frequency influence on the fatigue behaviour of unalloyed steels - Evaluation of the frequency influence on the fatigue behaviour of unalloyed steels

Date: 31.01.2023

Evaluation of the frequency influence on the fatigue behaviour of unalloyed steels The fatigue life evaluation methods (LPV) developed at WWHK in recent years have so far been limited purely to the transition between LCF (Low Cycle Fatigue) and HCF (High Cycle Fatigue) and to the HCF field. This has recently led to controversial discussions regar